Baltic 45 Meter super high-tech sailing yacht that completed construction in 2002 at Baltic Yachts, Finland.
The development of this project started one and a half year prior to production start with a preliminary base hull design followed by a number of preliminary layout proposals, specifications and detailed weight calculations all in close cooperation with the owner. Extensive VPP studies were carried out on variations from the base design, lighter, heavier, wider, narrower, higher and lower prismatic etc. In addition VPP studies were run on Sloop versus Ketch rigs, water ballast version, canting/lifting keel versus deep lifting keel etc. Based on the outcome of the research the decision was taken to go ahead with the project.
Design
Custom Baltic 45 Meter
Baltic Yachts LTD, Finland
NAVAL ARCHITECT
Reichel/Pugh Yacht Design
INTERIOR DESIGN
R&J Design and Design Unlimited
Deck Design
Reichel/Pugh Yacht Design and Design Unlimited
Dimensions and Weights
L.O.A. 44.85 m 147.15 ft
D.W.L. 37.66 m 123.56 ft
BEAM 8.28 m 27.17 ft
B.W.L. 7.11 m 23.33 ft
DRAFT 6.80 / 4.10 m 22.315 / 13.45 ft
DISPLACEMENT (SAILING) 113,650 kg 250,555 lb
BALLAST 53,470 kg 109,680 lb
IM 49.750 m 163.22 ft
J 16.500 m 53.94 ft
P 47.000 m 154.20 ft
E 16.200 m 53.15 ft
FUEL 6,000 l 1,585 US gal
WATER 2,500 l 660 US gal
Construction
Hull
Built using intermediate Modulus prepreg Carbon fibers. Aramide fibers in the outside skin below water line for added impact resistance. Nomex honeycomb and Core cell core. Cured under vacuum and high temperature, 85°C (185°F) for 24 hours.
KEEL

Keel fin made from casted Stainless Steel.
Lead bulb

DECK Built using intermediate modulus prepreg Carbon fibers. Nomex honeycomb and Core cell core. Cured under vacuum and high temperature, 85 °C (185 °F) for 24 hours.
DECK FITTINGS Pulpit, pushpit and lifeline stanchions made of Titanium tubes. Cleats and fairleads in Titanium.
Large spray hood/cabriolet over forward cockpit.
INTERIOR Structural bulkheads in prepreg Carbon fiber laminates. Laminates made in special laminating press. Visible surfaces are teak faced.
Salon settee
Dinette
Galley

Forwpeak Companionway

Master/Centerline Cabin
Master Cabin Settee
Guest cabin
Guest Cabin
   

Cabin

Head
   

Construction & Launching Pictures

     

 

 

 

Hull Plug

Deck Plug
   
Shrouds
Cabinetry

Captive Winches
Teak installation
 
Drop Anchor System
Engine Bed
 
   
 

Drawings