Semi-Custom Yachts - Baltic 50-11

NAVAL ARCHITECT

Tripp Design

GENERAL ENGINEERING

R&J Design

INTERIOR & DECK DESIGN

R&J / Baltic Yachts

Dimensions and Weights

	m	ft
L.O.A.	15.24	50.00
D.W.L.	12.90	42.30
BEAM	4.34	14.24
DRAFT	9.84	3.00
DISPLACEMENT	8,500 kg	18,740 lbs
BALLAST	4,083 kg	9,000 lbs
I	20.01	65.85
J	5.46	17.90
P	18.89	61.97
E	6.96	22.82

Construction

HULL	Laminate in Carbon fibres and epoxy resin. Aramide fibres in the outside skin in forward part of hull for added impact recistance. Corecell core. Cured under vacum in room temperature and post cured at 50 C (122°F).
KEEL	Stainless steel fin with a lead T-bulb.
DECK	Laminate in Carbon fibres and epoxy resin. Corecell core. Cured under vacum in room temperature and post cured at 50 C (122°F).
INTERIOR	Structural bulkheads as well as constructional panels in Carbon fibre/ Epoxy laminates. Prefabricated in a laminating press. Visible surfaces are teak faced.

Equipment

DECK FITTINGS	Harken
WINCHES	Harken 2 * B980.LPSTR 3 speed primaries 2 * B64.2STEA24H secondaries 2 * B48.2STR reef / halyard
ANCHORING SYSTEM	Bruce 20 kg anchor. Anchor launching system in stern. Anchormatic Windlass 24V
MAST AND RIGGING	Carbon mast with roll boom
MAIN ENGINE	Yanmar with saildrive
PROPELLER	MAX Prop 3-blade
FUEL TANK	300 l (80 gal).
WATER TANK	250 l (66 gal)
WATER MAKER	Spectra, Electrical. Capacity 60 l/h.
HEATER	Eberspächer D5L
MAIN ENGINE	Volvo Penta D2-55 55 hp diesel
GEAR BOX	Sail drive Volvo MS 25SR, reduction gear 2,19:1
MAST AND RIGGING	Three-spreader Hall Spars Carbon mast and main boom. Removable running backstays. OYS Rod rigging and Navtec hydraulics.
AC power sysstem	Battery charger for service batteries (24 V 25 A)
BATTERIES	Mastervolt Gel-cell service batteries 24 V/DC 240 Ah. Starting battery Optima 34M 12 V/DC 50 Ah
ELECTRONICS	Movie projector B&G Hydra 2000 wind instruments Depth sounder Log B&G kompass 5 pcs 20/20 fitted on mast 7 pcs FFD ICOM VHF GPS Navtex Sony 15´ TFT PC display Autopilot

Designers and Builder's Comments

Hull no. 08 of the Baltic 50 footers, was sold to a European client. The core material was aircraft-grade balsa and the hull laminate ar3e carbon fiber with Epoxy resin.

The interior layout shows a salon, galley, three cabins and two heads. The interior is finished in Teaky. She features a single cockpit deck layout. The deck layout is customized for short handed sailing. Both bow aned stern anchors has a pivoting arm that is manually operated and stored under deck.

This boat was delivered in the summer of 2003.

Semi-Custom Yachts - Baltic 50-08

Baltic 50-08

return topside